PAGE UPDATE
27.11.2011
|
FINAL DRIVE AND SHAFT
SPARES
Rear drive and shaft spares for
Ural and Dnepr motorbikes.
|
|
|
| |
|
Rear drive spare parts for KMZ Dnepr/Dnieper
K650, K750, MT9, MT10/36, MT11, MT16.
Also shaft drive parts for Ural, Uralmoto, 650, 750, Soviet knight,
wolf, M63, M66, M67,
We are always on the hunt for hard to find Dnepr bike spares,
but if we really can't find them
or when the original part can be improved, we develop and make
our own alternative.
Dnepr spares are now very hard to get. Generally the earlier the
spare, the harder it is to find.
Please note - we do not deal in used parts, or broken parts.
If we can't get it in unused new condition, we don't sell it. |
|
|
| Shaft - Ural 650 34mm. The
original M67, Soviet Night, Redstar, Northstar, early 750cc
era motorcycles were fitted with a shaft drive that had
a 33.4 X 49.4 mm seal at the final drive end. The newer
version has a 36 X 50 mm. The shaft is supplied complete
with front fork, wedge bolt, and new seal. This Shaft does
not fit bike before the M66 with the shorter frame. |
| Part - F21403/34mm |
Price
- £175.00 |
|
|
|
| Shaft - Dnepr. Genuine
Dnepr shaft complete with dust cover and front fork, supplied
in raw steel (i.e. not painted). Please note that this
is not the same as the Ural shaft, and the Ural shaft
will not fit a Dnepr. Due to lack of quality control we
can no longer offer Dnerp shaft drives. |
| Part - F21403/D |
Price
- N/A |
|
|
|
| Shaft - Ural 650 36mm. The
original M67, Soviet Night, Redstar, Northstar, early 750cc
era motorcycles were fitted with a shaft drive that had
a 33.4 X 49.4 mm seal at the final drive end. The newer
version has a 36 X 50 mm seal so we have machined some new
seal holders so you can convert from the older 34mm shaft
to the newer 36mm shaft. This Shaft does not fit bikes before
the M67. |
| Part - F21403/36mm |
Price
- £200.00 |
|
|
|
| Universal Joint. This fits
Ural M72, M63, M66, M67, 8.123, 8.128, Dnepr, K650, K750,
MT9, MT10/36, MT11, and probably all other Ural and Dnepr
models. If you have play in the shaft drive universal
joint this will fix it as long as the two outside forks
are not worn. Comes complete with centre cross, all needle
bearings, seals and caps. You need to retain your original
cir-clips. This is not exactly a joy to fit. |
| Part - F21413 |
Price
- £26.00 |
|
|
|
| Shaft - Ural Improved. The
improved shaft fitted from 2007 onwards to the 750 Ural
can also be fitted to the earlier bikes from M67 onwards.
The splined section is enclosed and has a dust cap. This
gives them a much longer life than the original open spline
design. The shaft is supplied with a new seal holder, seal
and wedge bolt so you have all you need to complete the
conversion. You will need to remove the swing arm to fit
this conversion. |
| Part - F21403/improved |
Price
- £240.00 |
|
|
|
Other Spares for Dnepr Motorcycles.
F2 Motorcycles Ltd are based in the UK
but have contacts all over the world.
When you buy from us, you buy new spare parts
in perfect condition in the UK.
This site only shows a fraction of our spares stock.
|
|
|
|
To order or for more information
please phone us on 01295 712900 between 2pm and 5pm
Tuesday to Saturday.
Postal Charges - £6.00 any order of any value
in the UK*
Flat charge of £6.00 applies to all UK orders*.
Orders will generally be sent by APC and will need a
signature on delivery.
All deliveries are tracked and insured.
Orders taken before 4pm Wednesday are posted Thursday
morning for delivery to you on Friday.
Orders taken before 4pm Saturday are posted Monday morning
for delivery to you on Tuesday.
* Sorry, this does not include NI, Scottish Highlands
or off shore Islands as defined by APC, but we will
quote the best price possible when you order.
|
|
|
|
